PD200 impulse current measuring device system

PD200 impulse current measuring device system

PD200 impulse current measuring device

The PD200 is a professional impulse current measuring system to detect leaks (holes) in non-conductive sealing systems and is suitable for detecting leaks on balconies, pool liners/swimming pools or flat roofs.

PD200 impulse current measuring device system

Unlike the previous model PD100, the PD200 has extremely compact dimensions - the size of the device can be reduced by more than 30%! These compact dimensions allow the PD200 to be transported e.g. the so-called via safety stairs to a suitable flat roof.

The PD200 impulse current measuring system easily wins in weight compared to the previous model. Although individual components are partially quite heavy (eg the transformer), the total weight can be reduced by about 20% (from 11.2 kg to 8.5 kg).

Signal lights are clearly visible on top of the housing - one standard pulse signal (green) and one short circuit signal (red), incl. Integrated tone generator. The tone and lights can be heard and seen from almost anywhere on the roof and are protected from damage by a solid steel hanger.

Unlike the previous model PD100, the PD200 has extremely compact dimensions - the size of the device can be reduced by more than 30%! These compact dimensions allow the PD200 to be transported e.g. the so-called via safety stairs to a suitable flat roof.

The PD200 impulse current measuring system easily wins in weight compared to the previous model. Although individual components are partially quite heavy (eg the transformer), the total weight can be reduced by about 20% (from 11.2 kg to 8.5 kg).

Signal lights are clearly visible on top of the housing - one standard pulse signal (green) and one short circuit signal (red), incl. Integrated tone generator. The tone and lights can be heard and seen from almost anywhere on the roof and are protected from damage by a solid steel hanger.

Green Signal Lamp: Flashes and sounds a signal tone when an impulse is given to the bell master

Red Signal Lamp: Flashes and beeps when there is a short circuit

The signal tone sounds only when the required function is activated.

Areas of application:

Non-destructive inspection of foil and bituminous roofs

Flat seal leak detection

Leakage detection even with loads on flat roofs (eg gravel, landscaping, panel covering, etc.)

Capillary leakage can also be detected where the flue gas method does not work

The set includes:

PD200G (generator)

Bag with handle and integrated PD200 G pulse generator with mains cable (220-240V, 50-60Hz)

1x connecting cable with crocodile clip in the lid black/red, length of each cable: 8 m

1x roll PD200 ring main, length 200 m

1x roll PD200 ground cable extension, red, length 25 m

2x folding measuring rods with rubber grips (3 pieces, length: 1m) incl. 1x retaining spring and 1x integrated winding for support ring main

1x connecting cable per measuring rod (red/black)

External dimensions: 305 x 420 x 360 mm

Total weight with standard accessories: 8.5 kg

PD200E (receiver)

Compact battery-powered PD200 E pulse receiver with shoulder strap

6x batteries type LR06 / AM-3 | AA | Minion

External dimensions: 160 x 80 x 55 mm

Weight (including batteries): 550 g

Special features:

A compact bag with all necessary accessories

Rugged, non-sparking design

An easy-to-use pulse receiver, controls are reduced to basic operating elements

Signal lamp for optical control of electrical impulses

Connectable acoustic signal for acoustic control of electrical impulses

Automatic shutdown of output signal in case of short circuit

Alarm signal in case of short circuit

Technical data:

Integrated short circuit test

Dimensions (L x W x H): 265 x 465 x 253 mm

Weight: 8.5 kg